One hundred pre-cut and threaded electrode tips for use on all voltage and current electrodes.

The P2020-S is a set of 4 Ag/AgCl electrode set for EasyMount Chamber System. It includes 2 sintered Ag/AgCl  pellet voltage sensing electrodes, 2 Ag wire current passing electrodes, and 8 electrode tips. Same as P2020 except connection is via 2' wire lead to 1mm pin.

The P2020-VS is a set of 4 sintered Ag/AgCl  pellet voltage sensing electrodes for EasyMount Chamber System.  Includes 8 electrode tips. Same as P2020-V except connection is via 2' wire lead to 1mm pin.

The P2020-IS is an Ag/AgCl electrode set for EasyMount Chamber System. Includes 2 sintered Ag/AgCl  pellet voltage sensing electrodes, 2 Ag wire current passing electrodes, and 8 electrode tips. Same as P2020 except connection is via 2' wire lead to 1mm pin.

40" Long Custom Electrode Lead  Set (2 mm pin to 1 mm gold socket,4 individual leads in one cable assembly)40" Long Custom Electrode Lead Set (2 mm pin to 1 mm gold socket,4 individual leads in one cable assembly)

The Ussing Chamber Filling Needle Tip (Model: FN15) is a 15G x 3.0" long luer lock type stainless steel needle with a 2.9mm diameter spherical tip to protect against scratching the acrylic surface of chamber. Needles can be attached to a syringe size of your choice (luer lock) -- recommend 5 to 10...

GWB1 Gas Washing Bottle (1 L) Our GWB1 washing bottle has been designed for purifying or saturating gases by passing them through a liquid. Made of glass, the gas washing bottle consists of an inlet tube that directs the gas into the liquid, allowing it to bubble through and interact...

TK-7 Tubing Kit for Water Bath. Includes tubes and connections to setup the water bath to the chamber stand. 

Two syringes with ball shape metal-tipped 15 gauge needles (Model: FNS15-2) for filling and emptying EasyMount chambers.

Caps for P2300, P2400, and P2250 Chambers

The Dual Air Control Valve (Model: P2060) easily controls the amount of gas bubbling your chambers with fingertip control of the screw type precision air valves. Includes two needle valves in an aluminum housing.  Mounts on all EasyMount chamber stands.

The DM_MC6 Module is an input module for connecting the voltage and current electrodes to the VCC MC2, VCC MC6, VCC MC8 and all expandable instruments. The DM MC6 is a small, shielded unit that should be mounted close to individual Ussing chambers and is recommended for use with both our EasyMount...

The DM660 Module is a single channel dummy membrane to be used with the VCC600 single channel clamp.  The DM660 module is an electronic dummy membrane used to simulate an Ussing experiment. It is useful both in verifying the function of the VCC600 voltage/current clamp and also as a learning...